Need an analog port to use a cordless phone, cordless headset, conferencing system, fax/modem or other device behind your PBX? Just plug this adapter into your telephone wall jack and you have one. Much simpler (and cheaper) than running a separate analog line. There's also a port for your digital phone, so it can share the same jack.
No PBX programming required.
This is truly a plug-and-play solution, so you can have your analog device online in just minutes. Your digital phone will continue to operate as usual any time you're not using your analog device.
If you use the adapter with a cordless phone the connection is completely seamless.
Both the cordless and your digital phone will ring incoming calls to your extensionand
you can answer on either. You're free to move while you talk. And, you don't
have to worry about missing important calls when you can carry your extension
If you use the adapter with a fax/modem you have full support for V.90 standards,
so you'll enjoy reliable transmission at up to 33,600 bps. The adapter converts
modem touch-tone dialing tones (a.k.a. DTMF) into digital code to communicate
through the PBX.
This adapter measures 3-3/4" l. x 1-1/2" w. x 1" h., weighs
2.7 ounces, and is powered through an AC adapter.Compatibility:
Use this adapter with Siemens Rolm 100, 200, 300, 400, and 600-series phone sets.
Before you order:
Adapter is NOT compatible with telephone sets that connect via 50-pin connectors.