Engenius DuraFon PRO 2-Way Radio Repeater Base Unit
Special Order DuraFon PRO 2-Way / Intercom Repeater BaseThe repeater base only works with the PRO system, PRO handsets and DuraWalkie (for PRO).
Use the Repeater base to enhance the transmitting range between: two (2) handsets in 2-way intercom mode, or broadcast-to-handsets mode (these modes are normally are handset to handset).
As part of the PRO system, the repeater base will use one of the eight (8) unique bases (00-07) available. The repeater base function requires handsets to have firmware version 3.10 or higher, which has a selectable menu (menu 7) to choose between handset-to-handset mode (default mode P2P) or repeater mode (which requires for you to also specify base ID (the repeater base ID). Once you have programmed the repeater base ID into the handset, it will use that repeater base for all future intercom calls and broadcast pages.
Repeater Base Station does not support:
- No support of PSTN (phone or PBX) line features.
- No support of repeaters in cascade (no repeating from one repeater to another repeater or standard base).